Complete RPS\u2122 2-stage drop-in trigger for the Scorpion EVO 3 and 3+.\u00a0 All parts are CNC machined from Rolled Plate Tool Steel, and NiB coated for smooth pull and glass sharp break on the second stage.\u00a0 The only thing you need to add is the trigger bow.<\/p>\n
Counts for 3 parts under 922(r), Sear, Hammer, and Disconnector.\u00a0 If you use a US made after-market trigger bow (not included), that would make it 4 parts total.<\/strong><\/p>\n Trigger includes:<\/big><\/big><\/p>\n Complete drop-in cage, pre-assembled, so you can swap it into your Scorpion without needing to deal with pins or springs.\u00a0 Just pull the safety, and remove one screw to swap the cage.<\/p>\n Key benefits:<\/big><\/big><\/p>\n – 4-1\/2 – 5 lb trigger pull.\u00a0 Short takeup.\u00a0 Crisp reset.<\/p>\n – Drop-in parts with no modifications to gun.<\/p>\n – Compatible with CZ Scorpion EVO 3 and 3+, and all after-market trigger bows.<\/p>\n – Made in the USA.<\/p>\n <\/p>\n NOTE: Some of these guns were shipped with trigger pack screws welded in place.\u00a0 In order to install these springs, the trigger pack will need to be removed, so the trigger screw will need to be drilled out, or a replacement trigger pack without the welded screw will need to be used.<\/p>\n <\/p>\n Installation Video<\/a><\/p>\n