National Match Prepped, this hammer is the only M1 / M14 hammer to ever offer drop-in NM performance, along with a 25%
reduction in lock time (hammer swing time).
Polished, ground, and fully hardened sear edge will release the hammer like breaking a glass rod.
A hard / low friction surface coat makes the trigger pull butter smooth and eliminates wear.
All parts are true ‘drop-in’ with no additional fitting, polishing, or tuning required on the parts or on the rifle.
Lock time is the time between when the trigger releases the hammer, and the hammer hits the firing pin. That’s time during
which the rifle is typically swinging off-target. Especially in offhand shooting, if shots are broken as you are moving ‘off-target’,
that delay can cost points.
The ShootingSight NM Hammer is machined from billet steel to be light weight, reducing polar moment by 40%, and optimizing
geometry for speed. Lock time is reduced 25% from 8.5ms to 6.5ms; which is as fast as a mil-spec hammer on an AR-15.
Sear edges are ground and polished to be sharp before an ultra hard and low friction surface coating is added. The result is a
smooth trigger pull, and a clean break which will not wear.
Comes with a new tool-steel hammer pin.
“These are worth every cent you pay for them. Try one in a match, you will never it have any other way. I got them in my match
conditioned 14s and in my McCoy M1. When I can afford another one, it will go in my other McCoy M1.” Nez R.
“It’s fantastic. Predictable, and so FAST! Whole system feels like running a bolt action. I like the feel of your NM better than
others, which to me interpose a disconnect at the junction of subconscious/trigger break, which make it difficult to ‘time’ a shot.”