2-stage Trigger/Hammer for the AR-15 and other platforms using similar pivot pin spacing.
These trigger/hammer sets are CNC machined using alloy Rolled Plate Steel. We NEVER use cast parts. RPS steel has about 15% – 20% greater ultimate tensile strength and fatigue performance versus cast parts, allowing the sear edges to be honed for an ultimate sharp break that will stay sharp for longer without requiring tuning or adjusting.
Triggers all use EXTRA POWER Wolff hammer springs for maximum ignition energy and lightning fast lock-time of 4ms. Second stage ‘creep’ is set to a minimum, so the second stage break is crisp with no felt-travel.
Triggers are non-adjustable. Sear surfaces have been lapped for ultimate smoothness, and have a NiB coating, which is very hard for wear resistance, and has a low CoF for smooth pull.
Pull weight is 4.5# to meet NRA/CMP minimum for Service Rifle class.