I have gotten several requests for a bore guide for a SCAR 17, so I finally made a small batch. The guide tube is brass, with a .308 ID, a 20 degree shoulder and an o-ring, so it will match up in the shoulder of the chamber to keep the solvents from leaking, and will prevent the cleaning rod from potentially scratching the throat.
Designed for those want to practice a little more TLC on their rifle.
Use by sliding the plastic block about half way up the brass tube, and inserting the rear of the tube (the end without the o-ring) through the rear of the receiver.
Slide the assembly back far enough that the front of the tube, with the o-ring) can be seated fully into the chamber.
Slide the plastic block all the way to the rear, so it locks in place. Tighten the thumb screw finger-tight.
The o-ring will now prevent cleaning solvents from leaking into the receiver, and the length of the guide will assure the cleaning rod is aligned with the bore, so there is no risk of scratching the throat of the chamber with the cleaning rod.
Price includes shipping
Made in USA.