Description
The RPS Triggers™ upgrade kit is a 2-stage Trigger/Hammer for the AR-15 and other platforms using similar pivot pin spacing.
These trigger/hammer sets are CNC machined, so all sear surfaces are made from alloy Rolled Plate Steel. We NEVER use cast parts. RPS steel has a finer grain structure than cast steel, giving it greater tensile strength, impact resistance, and fatigue performance versus cast parts. This allows the sear edges to be honed for an ultimate crisp break that will stay sharp longer for lifetime performance.
Kits from RPS Triggers™ all include EXTRA POWER Wolff hammer springs for maximum ignition energy and lightning fast lock-time of 4ms. Second stage ‘creep’ is set to a minimum, so the second stage break is crisp with no felt-travel.
Triggers are non-adjustable. Sear surfaces have been lapped for ultimate smoothness, and have a NiB coating, which is very hard for wear resistance, and has a low CoF for smooth pull.
Pull weight is 4.5# to meet NRA/CMP minimum for Service Rifle class.
Matt Scheetz –
i pick up the RPS TRIGGER at Camp Perry last year for a new rifle build. The RPS has a very positive 1st stage wall then a clean brake for the 2nd stage it just works great. Very good quality and I am really enjoying this trigger this year.